SEFA 8 M-2016 Scientific Equipment & Furniture Association Recommended Practices – Laboratory Grade Metal Casework
科学设备及家具协会 -金属材料实验室级案例、书柜和桌子
测试内容：
| Clause | Test Requirement | |
| 4 | Base cabinets (if applicable)橱柜底部(如适用) | |
| 4.1 | Description of test cabinet 橱柜测试描述 | |
| 4.2 | Cabinet load test橱柜载荷测试 | |
| 4.3 | Cabinet concentrated load test橱柜集中载荷测试 | |
| 4.4 | Cabinet torsion橱柜扭曲 | |
| 4.5 | Cabinet submersion test橱柜浸没测试 | |
| 4.6 | Spill containment test | |
| 5 | Doors (if applicable)门(如适用) | |
| 5.1 | Door hinge test门铰链测试 | |
| 5.2 | Door impact test门冲击测试 | |
| 5.3 | Door cycle test门疲劳测试 | |
| 6 | Drawers (if applicable)抽屉(如适用) | |
| 6.1 | Drawer static test抽屉静载测试 | |
| 6.2 | Drawer and door pull test抽屉和门拉力测试 | |
| 6.3 | Drawer impact test抽屉冲击测试 | |
| 6.4 | Drawer internal rolling impact抽屉内部翻滚冲击测试 | |
| 6.5 | Drawer cycle test抽屉疲劳测试 | |
| 7 | Wall mounted cabinets装墙吊柜 | |
| 7.1 | Description of test cabinet橱柜测试描述 | |
| 7.2 | Load test载荷测试 | |
| 8 | Tables 桌面 | |
| 8.1 | Description of test unit单元格测试描述 | |
| 8.2 | Table static load桌面静载测试 | |
| 8.3 | Table racking桌面推压测试 | |
| 8 | Cabinet surface finish tests (if applicable)橱柜表面处理测试(如适用) | |
| 8.1 | Chemical spot test化学试剂测试 | |
| 8.2 | Hot water test热水测试 | |
| 8.3 | Impact test冲击测试 | |
| 8.4 | Paint adhesion on steel钢铁表面油漆附着力测试 | |
| 8.5 | Paint hardness on steel钢铁表面油漆硬度测试 | |
| 8.6 | Dart impact resistance tes落锤冲击测试 | |
| 8.7 | Edge delaminating tests边角分层测试 | |
| 8.8 | Edge impact test边角冲击测试 | |
| 8.9 | Wear resistance (abrasion) test磨损测试 | |
| 9 | Shelving (if applicable)隔板(如适用) | |
| 9.1 | Shelf load test隔板载荷测试 | |
| 10 | Cabinet surface finish tests橱柜表面处理测试 | |
| 10.1 | Chemical spot test化学试剂测试 | |
| 10.2 | Hot water test热水测试 | |
| 10.3 | Finish impact test冲击测试 | |
| 10.4 | Paint adhesion steel钢铁表面油漆附着力测试 | |
| 10.5 | Paint hardness on steel钢铁表面油漆硬度测试 | |
| 9 | Wall, counter mounted, and tall cabinets (if applicable)装墙吊柜和高柜(如适用) | |
| 9.1 | Description of test unit单元格描述 | |
| 9.2 | Load test载荷测试 | |
| 10 | Tables (if applicable)桌面(如适用) | |
| 10.1 | Description of test unit单元格描述 | |
| 10.2 | Table static load桌面静载 | |
| 10.3 | Table racking桌面推压测试 | |
样品要求：
| ample required for base cabinet: 底柜样品要求: |
底柜Base cabinet： 至少1件产品 At least one product 要求Requirement： 尺寸Dimension：(除台面外Excluding surface panel) 宽Width 48″±1″× 深Depth 22″ ±1″× 高Height 35″±1″ 抽屉Drawer：位于柜上部，宽度全尺寸，高度近似1/4柜面开口高度，内部深度≥18″ 抽屉在全开位置应能拉出至少2/3内部深度。The drawer shall be above the cupboard, full width and approximately one-fourth the height of the cabinet’s face opening.The inside depth of the drawer shall be no less than 18”(457.2mm). The drawer in the full open position shall expose no less than 2/3 of the drawer interior. 门和搁板door and shelf：带两个门和一个可调节搁板Shall be double-door design and one adjustable shelf. 柜体背面cabinet back：整块背板可拆卸 Shall be the removable type 台面Top (如提供If provided)：厚度Thickness 1″，37-50磅/立方英尺(592.7 – 801 kg/m3)中密度纤维板 37-50 pcf medium density fiberboard，四周超出柜尺寸1″ The top dimensions will be such that it will overhang the cabinet perimeter by 1”. |
| Sample required for wall mounted cabinet: 吊柜样品要求: |
吊柜Wall mounted cabinet：至少1件产品 At least one product 要求Requirement： 尺寸Dimension： 宽Width 48″±1″ × 深Depth 13″±1″ × 高Height 30″±1″，带两个门和两层搁板，客户提供墙上固定螺栓The wall cabinet shall have two (2) doors and two (2) shelves，the mounting bolts shall be provided by clients |
| Sample required for table: 实验桌样品要求: |
实验桌 Table ： 至少1件产品 At least one product 要求Requirement： 尺寸Dimension：(除台面外Excluding surface panel) 长Length 60″±1″ × 深Depth 23″ ±1″ ×高Height 35″±1″ 台面Top：厚度thick 1″， 37-50磅/立方英尺(592.7 – 801 kg/m3)中密度纤维板37-50 pcf medium density fiberboard，四周超出尺寸1″ The top dimensions will be such that it will overhang the cabinet perimeter by 1”. |
| Sample required for finish panel: 涂漆钢板样品要求: |
涂漆钢板Finish panel：2件pieces 要求Requirement： 尺寸Dimension：14″X24″ (355.6mm x 609.6mm) 18#CRS钢板(1.2mm厚冷轧钢)上涂厚2mil-4mil的工厂标准漆 18 gauge CRS test sample with between 2 and 4 mills of the manufacturer’s standard paint finish applied. |
| Remark: 备注： |
Shall select the level of cycle test in application测试申请单应选择抽屉循环试验等级: 1. 实验室载荷等级Laboratory Load : 100 pounds (45.36 kg) 2. 重度等级实验室载荷Heavy Duty Laboratory Load: 150 pounds (68.04 kg) |